• 목록
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

• 페이스북 공유
• 트위터 공유

Why Your Car's Ignition Lock Isn't Working

An ignition lock is a security device that prevents your car from starting until you have the original key. It is activated when you use the wheel to provide support while getting in or out of your vehicle, or when you touch it when you are parked.

It could also be caused through vandalism or theft. If you're having trouble turning your key, a few simple fixes could assist:

The ignition switch for the ignition

The ignition switch is an essential part of your vehicle. It's among the first things you do on your vehicle and also activates nearly all other systems in the car, too. So when it doesn't work, it can be a major issue.

The primary reason that your car Ignition switch (Fromkorea.kr) might fail is because of wear and wear and tear. This can happen with time, particularly when your keychain is weighted down by additional items. You can prevent this from happening by having a separate key for your house and car and by reducing the weight on your keys. Another reason is mechanical issues. If the ignition cylinder is incorrectly aligned, it will make it difficult to remove or insert your key. If this is the case you'll need it replaced.

Your ignition switch could also be failing due to an electrical problem. In this case you may notice smoke or a burning smell when you try to start your car. If this happens it is important to get it repaired as soon as possible to avoid further damage.

Another reason you might be unable to start your car is because the ignition switch is not in the ON position. This is a safety feature that prevents someone from taking your car keys and then starting it. Typically, this means that you've put too high pressure on the ignition switch or the key isn't functioning correctly.

In this case it is possible to lubricate the lock to see if it improves. This will remove any dirt particles hindering the key from turning. Then try again. You can also use a silicone-based lubricant to prevent dirt from building up inside the lock. If you are still having trouble, try wiggling your key and then inserting it once again.

The lock is a cylinder

The ignition lock cylinder of automobiles is the mechanical part in which the key is put to start the car. The pins inside the cylinder move up and down, permitting the key to move in and out. Also, it has wafer tumblers to keep the pins in place. As time passes the tumblers may be damaged or even break, preventing the key from turning. The cylinder may fail which could result in a dead battery in your car and other issues.

The most well-known type is the cylindrical lock. The outer shell features a cylindrical hole that houses the plug. The outer shell is usually constructed of steel, while the plug is usually constructed of bronze or brass. Cylinder locks can be found with does a new ignition switch require a new key variety of different pins, which allow them to lock or unlock in multiple ways. Certain cylinder locks include additional security measures such as a snap-line or additional pins to prevent lock bumping.

While it is possible to finesse the cylinder of a lock that is difficult to work with graphite or WD-40, these methods aren't likely to work for very long. The more reliable option is to buy a brand new ignition lock cylinder. This can be accomplished by taking the old one out of your car, and replacing it with a new one. A new cylinder will require new keys.

Standard systems typically cost less than $300 to replace an ignition lock cylinder. Certain vehicles have electronic locks that are more costly to replace. It is essential that the process of replacing the ignition cylinder is done by an accredited professional. This is because the procedure involves removing parts that could interfere with the supplementary restraint systems (airbags).

You'll need to unplug the negative battery cables before replacing the battery. This is required to prevent an airbag from being accidentally deployed. You will also want to turn off any airbag system if your car is equipped with it. Follow all instructions provided by the manufacturer. You'll have to reset the anti-theft codes after installing the new ignition lock. This will prevent your car being taken. It may require a specific tool.

The crucial

If you turn your ignition key but it doesn't start your car, this could be an indication that your ignition lock isn't functioning properly. This tiny but crucial component ensures that only the correct key is used to start your car. It's a mechanical component that is connected to an electrical component to "read" anti-theft coding to allow your vehicle to start. Over time the key could wear out or damage the wafer tumblers in the lock cylinder. This can cause it to be difficult to turn.

You can fix ignition switch the ignition problem in your car with a few simple troubleshooting techniques. Make sure your key is in the correct position and that the indicator is pointing towards the P (Park slot) on the shifter. If not, it may prevent the vehicle from starting. It is possible to check with your dealer to determine what is the reason for the issue.

Another step you can take is to press the key in the ignition switch, but be cautious not to apply too much force or pressure. This will allow for the release of any small damage to the wafer tumblers that's preventing it from turning. If this doesn't work, you can try lubricating the lock cylinder with an oil based on silicone to get it moving again.

You can find these types of oil-based lubricants at the local auto parts store, but you should also be sure to use the best one that will stop dirt from building up and causing more problems in the future. If nothing else works you'll need to take off the ignition cylinder and replace it with a new one. This is an easy procedure that DIYers can do with the help of online guides or manuals for auto repair ignition lock cylinder.

If you've been detained recently for DUI or DWI your state might require that you install an ignition interlock (IID). These devices are designed to deter drunk driving by requiring drivers to breathe into a tube prior getting their car started. The device must be installed by a company that is approved, such as Intoxalock and LifeSafer.

The wiring

In many automobiles the ignition switch and lock cylinder are connected by wires. When you insert your key into the ignition, current flows through these wires to trigger all the electrical systems in your vehicle. If the electrical system isn't functioning or the switch is stuck in the on position, it may be due to a wire being disconnected. If you can't find the problem, it may be necessary to replace the ignition switch or cylinder.

Interlocks for ignition devices

A breathalyzer is an ignition interlock device that must be installed in your vehicle in order to meet the law or a criminal requirement. Ignition interlocks can detect alcohol-related disorders by analyzing the breath of a driver prior to when the engine is able to start. If the IID determines that the driver's BAC exceeds the limit allowed the horn sounds and/or lights flash, so that the driver can pull over and retest.

Ignition interlocks can be a useful option for those suffering from drinking disorders because they require that the user blow into a mouthpiece prior starting the vehicle. They are small, discreet and can be concealed to avoid being noticed. Ignition interlocks can be leased, not purchased outright and cost ranges from $60-90 a month.

The ignition switch and ignition cylinder are connected to control all the electrical components in your car. If any of these components are damaged or worn out, the ignition will not start. If you are experiencing any of these issues it is essential to fix them in the shortest time possible.

If you are having trouble getting your car started, try placing the key into neutral or park and then turning it. If this doesn't work, you might need to take off the airbag and disconnect the battery to get access to your ignition and key replacement switch. This is usually a straightforward job, but it might require does a new ignition switch require a new key steering wheel puller or a GM key removal tool, both of which are available for rental through AutoZone's loan-a-tool program for free.