• 목록
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

• 페이스북 공유
• 트위터 공유

How to Properly Start a Wood Burning Stove

Wood stoves are a comfortable way to heat a room and save energy. However, they require an amount of care.

A majority of modern wood burner wood stoves comply with EPA emission guidelines. You can look for an EPA sticker on the grate or under it to make sure your stove doesn't release harmful pollutants.

How to start a Wood Fire

The smell and the sound of a woodfire is a welcome addition in any home. It's important to know how to create a fire on your stove. Improper techniques can result in the fire not to burn effectively, and can produce creosote or smoke. The following tips can help you start the fire that will warm your home with minimum effort and ensure your safety.

Make sure to check the condition of your logs and coals before you start an fire. If they are wet it will dampen your fire and prevent the proper burning. You might also want to open the flue to let out any ash that has been deposited into the stove.

Start by placing a few small newspaper pieces that are dry and clean in your stove. This will help ignite the tinder and ignite the kindling. Once the tinder and kindling have begun to burn, you can add a layer of larger kindling pieces on the top. This should be done in a crosshatch pattern so there is air between each piece of wood.

If your wood stove comes with an automatic control for combustion, it will automatically pump air into the fire as it grows. This will allow the fire to burn at a steady pace without having to open the stove's doors to tend it.

It is essential to avoid using too much tinder, since it can cause the fire burning at an extremely high rate and fails to make use of the fuel as efficiently as possible. Once you've got a good bed in your stove of sparks, tinder and kindling begin the main flame by placing two large base logs on the grill. Then, add small woodburning stove logs perpendicular to these and on top of the base logs. This method of constructing an ember called a "top-down" fire can result in a successful and long-lasting fire that doesn't engulf the larger base logs.

Once the fire is established Close the damper and keep it shut. The fire could be smothered if the user opens the damper before it has fully established. It can also decrease the efficiency of the fire.

Adding Wood

Stoves aren't just beautiful home decor pieces - they can help you save money by providing efficient wood heating. They can be utilized together with a central heating system or furnace to provide supplemental heat in large homes. A lot of the clean-burning stoves on the market employ a superior combustion process that differentiates the burning of volatile compounds from combustible gases and tar by providing air in two distinct stages. The first stage allows the combustion of volatile compounds and the second offers fresh air that is pre-heated. This improves combustion and decreases the odors.

The amount of heat that you can get from your stove is contingent on the kind of wood used and the amount of moisture in it as well as the size of the logs. The logs should be stacked in a well-ventilated space for a period of time before you attempt to burn them to give the wood time to dry. If the logs are not dry enough they will release a lot of steam that is in essence wasted energy.

During the burning of the fire, add more wood to the stack in intervals, not all at one time. The addition of too much wood all at once could cause the temperature to rise within the firebox, causing the formation of a vortex that pulls smoke and volatile compounds that are not burned back into the flames. This could decrease the efficiency of your stove.

It is recommended to stay clear of any other combustibles, such as paper or cardboard in your stove, because they are not wood and possess different physical properties that can't be burned safely without creating dangerously high temperatures and excessive emissions. It is not recommended to burn compressed combustibles such as wood briquettes because they are different in chemical and physical composition from firewood. They are also not approved to be burned in wood burning stoves.

If you're installing wood-burning Outdoor Woodburning stoves into your home, it's essential to have it installed and tested by a qualified. A certified WETT technician can test your stove to ensure it is safe and reliable. They will also ensure whether your chimney is working properly. They provide maintenance services for your stove and chimney to ensure they remain in top shape. They will look for leaks in the areas connected to your chimney and fix any issues they discover. They will also ensure that the occupants of the house are aware of and follow the fire evacuation procedure in the event of an accident.

Adjusting the Damper

A damper controls how much heat is lost to the chimney when you aren't using your stove. Additionally, it can also help you to control the flame. If the flue opens, but the damper is too closed the fire will not ignite properly and smoke will billow into your home. You can adjust the damper to achieve the most effective flames by experimenting with different locations.

Typically, you'll want to keep the damper open enough to let air flow in and out of the flue when a fire is burning. This allows the fire to get going and also helps keep it in good shape so that you can enjoy it for hours. The right opening will also prevent the fire from starving of air, and also prevent it from blowing out smoke.

To adjust your damper correctly first, make sure that the fireplace has been heated and that the wood stove is hot. This will ensure the chimney is warm and that it has a strong draft. Once these are done the wood stove damper can be adjusted.

After the fire has burned for an extended period, close the damper approximately three quarters of the way. This will prevent warm air from the room from getting into the chimney, but still permitting smoke to escape.

This is the most effective way to keep your fire lit and keep it from getting too hot. The draft might be stopped if you close the damper too tightly but a cold wind can enter your home when the damper is not closed.

You can determine how much the damper is opened by placing your hand on the top of the inside of the flue pipe. If you feel a slight breeze pressing against your hand, it's likely to be in the open position.

The damper's setting can vary slightly from one stove to the next and even between different types of contemporary wood burning stove. Playing around with different settings will give you an idea of what to look for, but you might need to adjust it until you find the perfect setting for your stove.

Clean up

It is important to clean your flue and stove after the start of a fire. This can reduce the chance of a fire in the chimney, which is the primary reason for fires caused by wood stoves. Creosote, a sticky substance that can build up inside the stovepipe, is extremely dangerous. It is caused by the moisture and wood particles that are not burned that are unable to escape the fire. It could be caused by improperly lit fires.

Regular cleaning helps to stop the buildup of creosote. This can be done by cleaning your chimney once every year. It is also recommended that you get your stove and fireplace professionally cleaned and inspected at least once a yearly.

Also, it's an excellent idea to clean the ash tray and grates regularly. It is recommended to burn only wood that is well-seasoned, as it will produce less creosote. It is also a good idea to avoid burning cardboard, paper or plastic items. These items can release dangerous chemicals for the air and flue which can be released into your home.

The glass in the wood burning stove has to be cleaned frequently too. Most newer wood stoves have self-cleaning windows, which means they do not require as much scrubbing. You can make use of stove glass cleaners on the glass if you aren't able get the glass as clean as you would like on your wood stove.

Other ways to keep your wood burning stove for sale stove in good condition include lowering the vent when you aren't using it, and cracking windows or doors to allow more airflow. This will help keep the fire burning hotter and more efficiently, as it won't need to exert as much effort to circulate air. It is a good idea not to stack logs, or let them sit on the fire for a long period of time. This could cause splitting and warping. It is advised to avoid using combustible wood that has been compressed in your wood stove as the paraffin that is contained in the logs can melt and leak into the flue and cause damage.